Driver LC 50W 1200mA fixC SC SNC2

essence标准版系列

产品描述

  • 固定输出LED驱动
  • 可用作灯具内置件或带有卡扣装接应力消除的独立 LED 驱动(见配件)
  • 具有应力消除的独立 LED 驱动
  • 恒流LED驱动
  • 适用于保护等级1及保护等级2两类灯具
  • 耐热保护符合EN61347-2-13 C5e标准
  • 输出电流1,200 mA
  • 高达50,000小时的额定寿命
  • 5 年保修(保修条件请参见 www.tridonic.com)

外壳特性

  • 外壳: PC塑料, 白色
  • 安全等级IP20

功能

  • 过载保护
  • 短路保护
  • 空载保护
  • 爆炸保护电压 1kV
  • 浪涌保护电压 1 千伏(L 和 N 之间)
  • 浪涌保护电压 2 千伏(L/N 和接地之间)

典型应用

  • 用于零售业和医院的聚光灯和筒灯
  • 用于办公室和教室应用中的面板灯和区域灯
滚动翻阅表格
Ordering data
Type Article number Packaging, carton Packaging, low volume Packaging, high volume Weight per pc.
LC 50/1200/42 fixC SC SNC2 87500766 15 pc(s). 450 pc(s). 3,600 pc(s). 0.108 kg
Luminaire types:
Certificates:
IP20
SELV
110
Short Circuit Proof
BIS
KC
CCC
RCM
EAC
CE
UKCA
ENEC
RoHs
Technical data
Rated supply voltage 220 – 240 V
交流电压范围 198 – 264 V
Mains frequency 50 / 60 Hz
Overvoltage protection 320 V AC, 1 h
THD (at 230 V, 50 Hz, full load) < 20 %
Output current tolerance (1) ± 7.5 %
Typical output LF current ripple at full load (2) ± 25 %
Starting time (at 230 V, 50 Hz, full load) ≤ 0.5 s
Turn off time (at 230 V, 50 Hz, full load) ≤ 0.5 s
Hold on time at power failure (output) 0 s
环境温度 ta -20 ... +50 °C
Ambient temperature ta (at lifetime 50,000 h) 40 °C
Storage temperature ts -40 ... +80 °C
寿命 up to 50,000 h
Guarantee (conditions at www.tridonic.com) 5 Year(s)
尺寸 长 x 宽 x 高 115 x 43 x 30 mm
滚动翻阅表格
Specific technical data
Type 输出电流 (1) Input current (at 230 V, 50 Hz, full load) Max. input power Typ. power consumption (at 230 V, 50 Hz, full load) Output power range λ at full load (2) Efficiency at full load (2) λ over full operating range (min.) (2) Efficiency at min. load (2) Min. forward voltage Max. forward voltage Max. output voltage (U-OUT) Max. peak output current (3) Max. casing temperature tc
LC 50/1200/42 fixC SC SNC2 1,200 mA 260 mA 55.5 W 55 W 31.2 – 50.4 W 0.95 91 % 0.9C 90 % 26 V 42 V 60 V 1,590 mA 85 °C
文件      大小      日期       
 
Driver_LC_50W_1200mA_fixC_SC_SNC2_en.pdf
参数表
1.69 MB 21/06/2022
Leaflet_Driver_EN_web.pdf
Leaflet – LED Drivers
2.7 MB 26/04/2022
认证 / 符合性声明
型号      物品号      认证     
认证 ()

应力消除套件 43x30mm Accessories

Certificates:
MM
Independent gear
SC2 - Protection Class 2
  • ACU SC 30x43x30mm CLIP-ON SR SET (28001168, non-pre-assembled)

    ACU SC 30x43x30mm CLIP-ON SR SET (28001168, non-pre-assembled)

  • ACU SC 30x43x30mm CLIP-ON SR SET 300 (28001351, non-pre-assembled, 300 pcs. packaging)

    ACU SC 30x43x30mm CLIP-ON SR SET 300 (28001351, non-pre-assembled, 300 pcs. packaging)

  • ACU SC 30x43x30mm CLIP-ON SR PA (28001699, pre-assembled)

    ACU SC 30x43x30mm CLIP-ON SR PA (28001699, pre-assembled)

  • ACU SC 15x43x30mm CLIP-ON SR PA (28001574, pre-assembled)

    ACU SC 15x43x30mm CLIP-ON SR PA (28001574, pre-assembled)

产品描述

  • 用于独立应用的可选应力消除套件
  • 将 LED 驱动转换为与 Class II 完全兼容的 LED 驱动(例如,天花板安装)
  • 对于LED驱动,用于长期内置式的无螺钉索夹 (30 x 43 x 30 mm)来说是简易且不需要工具来装配的
  • 配有用于短压线盖的螺钉(15 x 34 x 30 毫米)
  • 总长度 = 长度 L(LED 驱动)+ 2×30 毫米(长压线盖),2×15 毫米(短压线盖)或长和短压线盖的任意组合
  • 可提供非预组装和预组装的标准 SC(L = 30 毫米)
  • 仅提供预装配的短 SC(L = 15 毫米)
Ordering data
Type Article number Packaging, carton (1) Packaging, outer box Weight per pc.
ACU SC 43x30mm CLIP-ON SR SET 28001168 10 pc(s). 500 pc(s). 0.038 kg
ACU SC 43x30mm CLIP-ON SR SET 300 28001351 300 pc(s). 300 pc(s). 0.038 kg
ACU SC 30x43x30mm CLIP-ON SR PA 28001699 10 pc(s). 500 pc(s). 0.021 kg
ACU SC 15x43x30mm CLIP-ON SR PA 28001574 10 pc(s). 1,200 pc(s). 0.010 kg
CAD / RAY
Type Article number CAD文件
ACU SC 43x30mm CLIP-ON SR SET 28001168 CAD (3.7 MB)
ACU SC 43x30mm CLIP-ON SR SET 300 28001351 CAD (3.7 MB)
ACU SC 30x43x30mm CLIP-ON SR PA 28001699 CAD (3.7 MB)
ACU SC 15x43x30mm CLIP-ON SR PA 28001574 CAD (3.2 MB)
滚动翻阅表格
EPD
Type Article number 环保产品声明(EPD)
LC 50/1200/42 fixC SC SNC2 87500766 EPD