- 锐高
- 产品
- LED驱动
- 产品检索
- 第四代
- companionSUITE software
- Outdoor致密型调光
- Outdoor linear IP67/IP66 dimming
- 室外线性IP67固定输出
- Industry线性/区域 调光
- Industry线性/区域 固定输出
- 线性调光 SELV
- 线性调光 non-SELV
- 线性固定输出 SELV
- 线性固定输出 non-SELV
- 紧凑型调光驱动
- premium
- excite
- LC 14 W 100-400 mA o4a NF SC EXC3
- LC 14 W 100-400 mA bDW NF SC EXC3
- LC 28 W 300-700 mA o4a NF SC EXC3
- LC 28 W 300-700 mA bDW NF SC EXC3
- LC 38 W 650-1050 mA o4a NF SC EXC3
- LC 38 W 650-1050 mA bDW NF SC EXC3
- LC 20 W 100–1050 mA o4a NF SR EXC3
- LC 27 W 100–500 mA o4a NF SR EXC3
- LC 45 W 450–1050 mA o4a NF SR EXC3
- advanced
- essence
- Tunable White
- 紧凑型固定输出驱动
- in-track dimming
- in-track fixed output
- DC-String
- 恒压驱动器
- Universal wide voltage (UNV)
- Matter components
- 配件
- LED模组
- Tunable White
- 应急照明装置
- 灯光控制与连接
- LED驱动
- 应用领域
- 互联网照明
- 案例
- 服务
- 技术参数
- 联系
Driver LC 28W 300–700mA o4a NFC SC EXC3
excite标准版系列
产品描述
- 新增:lumDATA(DALI-2 第 251、252 和 253 部分)
- 可用于灯具安装或带卡扣式应力消除装置的独立模块(见附件)
- 调光范围为 1 – 100 %(最低 5 毫安)
- 适用于保护等级1及保护等级2两类灯具
- 耐热保护符合EN61347-2-13 C5e标准
- 使用 NFC 或 DALI 可在 300 - 700 毫安之间调节输出电流
- 最大输出功率28W
- 效率高达 86%
- 待机时最低的功率输入 < 0.35 瓦
- 高达100,000小时的额定寿命
- 5 years guarantee (conditions at www.tridonic.com)
外壳特性
- 外壳: PC塑料, 白色
- 安全等级IP20
接口
- 近场通信 (NFC)
- one4all(DALI-2 DT 6、switchDIM、corridorFUNCTION)
- 端口:45° 推入式端口
功能
- 1毫安的可调节输出电流(NFC、DALI)
- 恒定光照输出功能
- 保护功能(过热、短路、过载、空载)
- 适用于符合 EN 50172 的应急照明系统
优点
- 通过 companionSUITE(NFC、DALI)灵活配置
- 具备最大兼容性并以应用为主导的操作窗口
- 由于低待机耗损和高效率而达到的最佳节能
- 安装 NFC 接口后可进行现场编程
典型应用
- 用于筒灯,聚光灯,装饰运用
Ordering data | ||||
---|---|---|---|---|
Type | Article number | Packaging, carton | Packaging, pallet | Weight per pc. |
LC 28/300-700/42 o4a NF SC EXC3 | 28004042 | 10 pc(s). | 1,150 pc(s). | 0.101 kg |
- Luminaire types:
-
-
-
-
- Certificates:
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Technical data | |
---|---|
Rated supply voltage | 220 – 240 V |
交流电压范围 | 198 – 264 V |
DC voltage range | 176 – 280 V |
Mains frequency | 0 / 50 / 60 Hz |
Overvoltage protection | 320 V AC, 48 h |
Typ. rated current (at 230 V, 50 Hz, full load) (1) (2) | 153 mA |
Typ. current (220 V, 0 Hz, full load, 15 % dimming level) (2) | 29 mA |
Leakage current (at 230 V, 50 Hz, full load) (1) (2) | < 250 µA |
Max. input power | 32.87 W |
Typ. efficiency (at 230 V, 50 Hz, full load) (2) | 86 % |
λ (at 230 V, 50 Hz, full load) (1) | 0.97 |
λ (over full operating range) | 0.47C – 0.97 |
Typ. power consumption on stand-by (3) | < 0.35 W |
In-rush current (peak / duration) | 3.31 A / 43 µs |
THD (at 230 V, 50 Hz, full load) (1) | < 10 % |
Starting time (AC mode) | < 700 ms |
Starting time (DC mode) | < 500 ms |
Switchover time (AC/DC) (4) | < 800 ms |
Turn off time (at 230 V, 50 Hz, full load) | < 50 ms |
Output current tolerance (1) (5) | ± 5 % |
Max. output current peak (non-repetitive) | ≤ output current + 20 % |
Output LF current ripple (< 120 Hz) | ± 2 % |
Output P_ST_LM (at full load) | ≤ 1 |
Output SVM (at full load) | ≤ 0.4 |
Max. output voltage (U-OUT) | 60 V |
调光范围 | 1 – 100 % (min. 5 mA) |
Mains surge capability (between L - N) (6) | 1 kV |
Mains surge capability (between L/N - PE) | 2 kV |
Burst protection (7) | 1 kV |
Burst / surge peaks output side against PE | < 3 kV |
环境温度 ta | -20 ... +50 °C |
Max. casing temperature tc | 80 °C |
保护类型 | IP20 |
寿命 | up to 100,000 h |
Guarantee | 5 Year(s) |
尺寸 长 x 宽 x 高 | 97 x 43 x 30 mm |
- (1) Valid at 100 % dimming level.
- (2) Depending on the selected output current.
- (3) Depending on the DALI traffic at the interface.
- (4) Valid for immediate change of power supply type otherwise the starting time is valid.
- (5) Output current is mean value.
- (6) L-N acc. to EN 61000-4-5. 2 Ohm, 1.2/50 µs, 8/20 µs.
- (7) Also applies to corridorFUNCTION.
Specific technical data | ||||||
---|---|---|---|---|---|---|
Type | Output current (1) | Min. output voltage | Max. output voltage | Max. output power | Typ. power consumption (at 230 V, 50 Hz, full load) | Typ. current consumption (at 230 V, 50 Hz, full load) |
LC 28/300-700/42 o4a NF SC EXC3 | 300 mA | 7.5 V | 42 V | 12.6 W | 15.0 W | 65 mA |
LC 28/300-700/42 o4a NF SC EXC3 | 400 mA | 7.5 V | 42 V | 16.8 W | 19.5 W | 85 mA |
LC 28/300-700/42 o4a NF SC EXC3 | 500 mA | 7.5 V | 42 V | 21.0 W | 24.2 W | 105 mA |
LC 28/300-700/42 o4a NF SC EXC3 | 600 mA | 7.5 V | 42 V | 25.2 W | 29.4 W | 133 mA |
LC 28/300-700/42 o4a NF SC EXC3 | 700 mA | 7.5 V | 40 V | 28.0 W | 32.0 W | 153 mA |
认证 / 符合性声明 | ||
型号 | 物品号 | 认证 |
---|---|---|
认证 () |
应力消除套件 43x30mm Accessories
- Certificates:
-
-
-
产品描述
- 用于独立应用的可选应力消除套件
- 将 LED 驱动转换为与 Class II 完全兼容的 LED 驱动(例如,天花板安装)
- 对于LED驱动,用于长期内置式的无螺钉索夹 (30 x 43 x 30 mm)来说是简易且不需要工具来装配的
- 配有用于短压线盖的螺钉(15 x 34 x 30 毫米)
- 总长度 = 长度 L(LED 驱动)+ 2×30 毫米(长压线盖),2×15 毫米(短压线盖)或长和短压线盖的任意组合
- 可提供非预组装和预组装的标准 SC(L = 30 毫米)
- 仅提供预装配的短 SC(L = 15 毫米)
Ordering data | ||||
---|---|---|---|---|
Type | Article number | Packaging, carton (1) | Packaging, outer box | Weight per pc. |
ACU SC 43x30mm CLIP-ON SR SET | 28001168 | 10 pc(s). | 500 pc(s). | 0.038 kg |
ACU SC 43x30mm CLIP-ON SR SET 300 | 28001351 | 300 pc(s). | 300 pc(s). | 0.038 kg |
ACU SC 30x43x30mm CLIP-ON SR PA | 28001699 | 10 pc(s). | 500 pc(s). | 0.021 kg |
ACU SC 15x43x30mm CLIP-ON SR PA | 28001574 | 10 pc(s). | 1,200 pc(s). | 0.010 kg |
CAD / RAY | ||
---|---|---|
Type | Article number | CAD文件 |
ACU SC 43x30mm CLIP-ON SR SET | 28001168 | CAD (3.7 MB) |
ACU SC 43x30mm CLIP-ON SR SET 300 | 28001351 | CAD (3.7 MB) |
ACU SC 30x43x30mm CLIP-ON SR PA | 28001699 | CAD (3.7 MB) |
ACU SC 15x43x30mm CLIP-ON SR PA | 28001574 | CAD (3.2 MB) |
CAD / RAY | ||
---|---|---|
Type | Article number | CAD文件 |
LC 28/300-700/42 o4a NF SC EXC3 | 28004042 | CAD (2.0 MB) |
EPD | ||
---|---|---|
Type | Article number | 环保产品声明(EPD) |
LC 28/300-700/42 o4a NF SC EXC3 | 28004042 | EPD |