Driver LC 17W 250–700mA bDW SC PRE2

premium标准版系列

  • With strain-relief

    With strain-relief

产品描述

  • 可集成到 Casambi 系统中 (Casambi Ready)
  • 全新：lumDATA（灯具数据、能源报告以及诊断和维护）
  • 可调光的内置式恒流LED驱动
  • 可用作灯具内置件或带有卡扣装接应力消除的独立 LED 驱动（见配件）
  • 自动构建最多 250 个节点的无线通信网络
  • 通过 I-SELECT 2 插头在 250 和 700 毫安之间调节输出电流
  • 最大输出功率17W
  • 效率高达 86％
  • 待机模式下的输入功率 < 0,35 W
  • 调光范围：1到100 %
  • 适用于保护等级1及保护等级2两类灯具
  • 高达100,000小时的额定寿命
  • 5 年保修（保修条件请参见 www.tridonic.com）

外壳特性

  • 外壳: PC塑料, 白色
  • 安全等级IP20

接口

  • basicDIM Wireless
  • 端口：45° 推入式端口

功能

  • 1毫安的可调节输出电流（I-SELECT 2）
  • 恒定光照输出功能
  • 交流下渐亮启动
  • 通过 fade2zero 关闭驱动
  • 用于记录特定事件的服务监视器
  • 保护功能（过热、短路、过载、空载、输入电压范围、减小的浪涌放大）
  • 智能电压保护（过压和欠压监控）
  • 适用于符合 EN 50172 的应急照明系统

优点

  • 具备最大兼容性并以应用为主导的操作窗口
  • 由于低待机耗损和高效率而达到的最佳节能
  • Flexible configuration via basicDIM Wireless and I-SELECT 2

典型应用

  • 为了在办公应用里线性或大面积照明
滚动翻阅表格
Ordering data
Type Article number Packaging, carton Packaging, pallet Weight per pc.
LC 17/250-700/50 bDW SC PRE2 28002412 10 pc(s). 1,000 pc(s). 0.125 kg
Luminaire types:
Certificates:
lumDATA
IP20
SELV
Short Circuit Proof
110
r2m
DoNotCover
RCM
BIS
KC
CCC
EAC
CE
UKCA
ENEC
RoHs
Technical data
Rated supply voltage 220 – 240 V
交流电压范围 198 – 264 V
DC voltage range 176 – 280 V
Mains frequency 0 / 50 / 60 Hz
Overvoltage protection 320 V AC, 48 h
Typ. current (at 230 V, 50 Hz, full load) (1) (2) 65 – 95 mA
Typ. current (220 V, 0 Hz, full load, 15 % dimming level) (2) 15 – 25 mA
Leakage current (at 230 V, 50 Hz, full load) (1) (2) < 700 µA
Max. input power 22.5 W
Typ. efficiency (at 230 V, 50 Hz, full load) (2) 86 %
λ (at 230 V, 50 Hz, full load) 0.96
Typ. power consumption on stand-by < 0.35 W
Typ. input current in no-load operation 12.3 mA
Typ. input power in no-load operation 0.35 W
In-rush current (peak / duration) 20 A / 140 µs
THD (at 230 V, 50 Hz, full load) (1) < 3 %
Starting time (at 230 V, 50 Hz, full load) (1) < 0.7 s
Starting time (DC mode) < 0.4 s
Switchover time (AC/DC) (3) < 0.4 s
Turn off time (at 230 V, 50 Hz, full load) < 30 ms
Output current tolerance (1) (4) ± 3 %
Max. output current peak (non-repetitive) ≤ output current + 40 %
Output LF current ripple (< 120 Hz) ± 5 %
Output P_ST_LM (at full load) ≤ 1
Output SVM (at full load) ≤ 0.4
Max. output voltage (U-OUT) 60 V
调光范围 1 – 100 %
Mains surge capability (between L - N) 1 kV
Mains surge capability (between L/N - PE) 2 kV
Surge voltage at output side (against PE) < 0.5 kV
保护类型 IP20
Radio transceiver operating frequencies 2.4 – 2.483 GHz
Max. output power radio transceiver (E.R.I.P.) (5) < + 20 dBm
寿命 up to 100,000 h
Guarantee (conditions at www.tridonic.com) 5 Year(s)
尺寸 长 x 宽 x 高 130 x 43 x 30 mm
滚动翻阅表格
Specific technical data
Type Output current (1) (2) Min. output voltage Max. output voltage Max. output power Typ. power consumption (at 230 V, 50 Hz, full load) Typ. current consumption (at 230 V, 50 Hz, full load) tc point max. 环境温度 ta I-SELECT 2 resistor value (3)
LC 17/250-700/50 bDW SC PRE2 250 mA 15 V 50 V 12.5 W 15.3 W 68 mA 80 °C -25 ... +55 °C –
LC 17/250-700/50 bDW SC PRE2 300 mA 15 V 50 V 15.0 W 18.0 W 80 mA 80 °C -25 ... +55 °C 16.67 kΩ
LC 17/250-700/50 bDW SC PRE2 350 mA 15 V 49 V 17.2 W 20.1 W 89 mA 80 °C -25 ... +55 °C 14.29 kΩ
LC 17/250-700/50 bDW SC PRE2 400 mA 15 V 43 V 17.2 W 19.9 W 88 mA 75 °C -25 ... +60 °C 12.50 kΩ
LC 17/250-700/50 bDW SC PRE2 450 mA 15 V 38 V 17.1 W 19.6 W 88 mA 75 °C -25 ... +60 °C 11.11 kΩ
LC 17/250-700/50 bDW SC PRE2 500 mA 15 V 34 V 17.0 W 19.5 W 86 mA 75 °C -25 ... +60 °C 10.00 kΩ
LC 17/250-700/50 bDW SC PRE2 550 mA 15 V 31 V 17.1 W 19.5 W 86 mA 75 °C -25 ... +60 °C 9.09 kΩ
LC 17/250-700/50 bDW SC PRE2 600 mA 15 V 28 V 16.8 W 19.2 W 85 mA 75 °C -25 ... +60 °C 8.33 kΩ
LC 17/250-700/50 bDW SC PRE2 650 mA 15 V 26 V 16.9 W 19.4 W 86 mA 75 °C -25 ... +60 °C 7.69 kΩ
LC 17/250-700/50 bDW SC PRE2 700 mA 15 V 24 V 16.8 W 19.4 W 85 mA 75 °C -25 ... +60 °C 0.00 kΩ
文件      大小      日期       
 
Driver_LC_17W_250-700mA_bDW_SC_PRE2_en.pdf
参数表 		1.94 MB 31/10/2023
新
Function_overview_LED_drivers_en.pdf
LED drivers – Functional description 		4.59 MB 10/07/2023
Manual_4remote-BT-App_Main_menu_en.pdf
Manual 4remote BT App – Main menu 		5.35 MB 18/11/2022
Manual_4remote-BT-App_Inside_the_network_en.pdf
Manual 4remote BT App – Inside the network 		29.96 MB 21/10/2022
basicDIM-Wireless_At_a_Glance_en.pdf
basicDIM Wireless – At a glance 		2.03 MB 24/05/2023
Profiles_basicDIM_Wireless_LED_drivers_(non-TW)_EN.pdf
basicDIM Wireless LED drivers – Profiles 		1.61 MB 22/12/2022
Application_Note_basicDIM_Wireless_How_to_copy_shared_fixtures_en.pdf
basicDIM Wireless – How to copy shared fixtures 		506 KB 18/11/2022
AaG_Basics_of_radio_technology_en.pdf
Radio technology in lighting applications – At a glance 		2.09 MB 20/02/2023
Leaflet_Driver_EN_web.pdf
Leaflet – LED Drivers 		2.7 MB 26/04/2022
Leaflet_basicDIM_Wireless_en_web.pdf
Leaflet basicDIM Wireless 		6.34 MB 20/07/2023
Leaflet_companionSUITE_EN.pdf
Leaflet companionSUITE 		2.26 MB 23/03/2022
认证 / 符合性声明
型号      物品号      认证     
认证 ()

证书: ()

文件      国家      大小      颁发日期     
新

应力消除套件 43x30mm Accessories

Certificates:
MM
Independent gear
SC2 - Protection Class 2
  • ACU SC 30x43x30mm CLIP-ON SR SET (28001168, non-pre-assembled)

    ACU SC 30x43x30mm CLIP-ON SR SET (28001168, non-pre-assembled)

  • ACU SC 30x43x30mm CLIP-ON SR SET 300 (28001351, non-pre-assembled, 300 pcs. packaging)

    ACU SC 30x43x30mm CLIP-ON SR SET 300 (28001351, non-pre-assembled, 300 pcs. packaging)

  • ACU SC 30x43x30mm CLIP-ON SR PA (28001699, pre-assembled)

    ACU SC 30x43x30mm CLIP-ON SR PA (28001699, pre-assembled)

  • ACU SC 15x43x30mm CLIP-ON SR PA (28001574, pre-assembled)

    ACU SC 15x43x30mm CLIP-ON SR PA (28001574, pre-assembled)

产品描述

  • 用于独立应用的可选应力消除套件
  • 将 LED 驱动转换为与 Class II 完全兼容的 LED 驱动（例如，天花板安装）
  • 对于LED驱动，用于长期内置式的无螺钉索夹 (30 x 43 x 30 mm)来说是简易且不需要工具来装配的
  • 配有用于短压线盖的螺钉（15 x 34 x 30 毫米）
  • 总长度 = 长度 L（LED 驱动）+ 2×30 毫米（长压线盖），2×15 毫米（短压线盖）或长和短压线盖的任意组合
  • 可提供非预组装和预组装的标准 SC（L = 30 毫米）
  • 仅提供预装配的短 SC（L = 15 毫米）
Ordering data
Type Article number Packaging, carton (1) Packaging, outer box Weight per pc.
ACU SC 43x30mm CLIP-ON SR SET 28001168 10 pc(s). 500 pc(s). 0.038 kg
ACU SC 43x30mm CLIP-ON SR SET 300 28001351 300 pc(s). 300 pc(s). 0.038 kg
ACU SC 30x43x30mm CLIP-ON SR PA 28001699 10 pc(s). 500 pc(s). 0.021 kg
ACU SC 15x43x30mm CLIP-ON SR PA 28001574 10 pc(s). 1,200 pc(s). 0.010 kg
CAD / RAY
Type Article number CAD文件
ACU SC 43x30mm CLIP-ON SR SET 28001168 CAD (3.7 MB)
ACU SC 43x30mm CLIP-ON SR SET 300 28001351 CAD (3.7 MB)
ACU SC 30x43x30mm CLIP-ON SR PA 28001699 CAD (3.7 MB)
ACU SC 15x43x30mm CLIP-ON SR PA 28001574 CAD (3.2 MB)

I-SELECT 2 PLUG PRE / EXC Accessories

产品描述

  • 用于设定输出电流值的即用型电阻
  • 与LED驱动I-select 2界面兼容；与1代I-SELECT不兼容
  • 电阻为基本绝缘
  • 电阻功率 0.25 瓦
  • 电流容差额定输出为电流容差的±2％
  • 与LED驱动PRE和EXC系列兼容

计算示例

  • R [kΩ] = 5 V / I_out [mA] x 1000
  • 使用 E96 电阻
  • 电阻值公差 ≤ 1％；电阻功率 ≥ 0.1 瓦；需要基本绝缘
  • 当使用超过指定范围的电阻值时，输出电流将自动设置为最小值（电阻值过大时）或最大值（电阻值过小时）
Ordering data
Type Article number 颜色 Marking 电流 Resistor value Packaging, bag Weight per pc.
I-SELECT 2 PLUG 250MA BL 28001106 Blue 0250 mA 250 mA 20.00 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 275MA BL 28001107 Blue 0275 mA 275 mA 18.20 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 300MA BL 28001108 Blue 0300 mA 300 mA 16.50 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 325MA BL 28001109 Blue 0325 mA 325 mA 15.40 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 350MA BL 28001110 Blue 0350 mA 350 mA 14.30 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 375MA BL 28001111 Blue 0375 mA 375 mA 13.30 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 400MA BL 28001112 Blue 0400 mA 400 mA 12.40 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 425MA BL 28001251 Blue 0425 mA 425 mA 11.80 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 450MA BL 28001113 Blue 0450 mA 450 mA 11.00 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 475MA BL 28001252 Blue 0475 mA 475 mA 10.50 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 500MA BL 28001114 Blue 0500 mA 500 mA 10.00 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 525MA BL 28001960 Blue 0525 mA 525 mA 9.53 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 550MA BL 28001115 Blue 0550 mA 550 mA 9.09 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 600MA BL 28001116 Blue 0600 mA 600 mA 8.25 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 650MA BL 28001117 Blue 0650 mA 650 mA 7.68 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 700MA BL 28001118 Blue 0700 mA 700 mA 7.15 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG MAX BL 28001099 Blue MAX MAX 0.00 kΩ 10 pc(s). 0.001 kg
CAD / RAY
Type Article number CAD文件
I-SELECT 2 PLUG 250MA BL 28001106 CAD (712.6 KB)
I-SELECT 2 PLUG 275MA BL 28001107 CAD (712.6 KB)
I-SELECT 2 PLUG 300MA BL 28001108 CAD (712.6 KB)
I-SELECT 2 PLUG 325MA BL 28001109 CAD (712.6 KB)
I-SELECT 2 PLUG 350MA BL 28001110 CAD (712.6 KB)
I-SELECT 2 PLUG 375MA BL 28001111 CAD (712.6 KB)
I-SELECT 2 PLUG 400MA BL 28001112 CAD (712.6 KB)
I-SELECT 2 PLUG 425MA BL 28001251 CAD (712.6 KB)
I-SELECT 2 PLUG 450MA BL 28001113 CAD (712.6 KB)
I-SELECT 2 PLUG 475MA BL 28001252 CAD (712.6 KB)
I-SELECT 2 PLUG 500MA BL 28001114 CAD (712.6 KB)
I-SELECT 2 PLUG 525MA BL 28001960 CAD (712.6 KB)
I-SELECT 2 PLUG 550MA BL 28001115 CAD (712.6 KB)
I-SELECT 2 PLUG 600MA BL 28001116 CAD (712.6 KB)
I-SELECT 2 PLUG 650MA BL 28001117 CAD (712.6 KB)
I-SELECT 2 PLUG 700MA BL 28001118 CAD (712.6 KB)
I-SELECT 2 PLUG MAX BL 28001099 CAD (712.6 KB)
滚动翻阅表格
CAD / RAY
Type Article number CAD文件
LC 17/250-700/50 bDW SC PRE2 28002412 CAD (704.6 KB)
EPD
Type Article number 环保产品声明(EPD)
LC 17/250-700/50 bDW SC PRE2 28002412 EPD