EM powerLED SELFTEST FX LiFePO4 1 – 2 W

Combined emergency lighting LED driver 1 – 4 W

  • Screw-fix

    Screw-fix

  • Clip-fix

    Clip-fix

产品描述

  • 带有自我检测功能的应急照明LED驱动
  • 适用于电池供电应急照明
  • 输出电压 < 60 伏直流电的 SELV
  • 薄型外壳(横截面积(21 x 30 mm)
  • 五年保修期

特性

  • 电源模式和应急模式
  • 自我检测符合IEC 62034标准
  • 恒流模式
  • 螺纹固定或扣件固定(固定夹)
  • 1,2或3 h额定工作时间
  • 可选择工作时间(跳线)
  • 2种颜色的LED状态指示灯
  • “休息模式”功能
  • SELF分类(输出powerLED、蓄电池、LED 状态指示灯、测试开关)
  • 激活深度放电保护后,电池能耗极低
  • 智能充电系统
  • 深度放电保护
  • 耐热保护符合
  • 极性颠倒保护

电池

  • 带锐高 LiFeGuard 的磷酸铁锂电池电池
  • 过度充电/放电保护
  • 确保使用安全
  • 高达 8 年的设计寿命
  • 4年质保
滚动翻阅表格
Ordering data
Type (1) Article number 尺寸 长 x 宽 x 高 Max. number of LEDs Packaging, carton Packaging, pallet
Screw fastening version
EM pLED ST FX 201 LiFePO4 1W SCREW 89800798 139 x 30 x 21 mm 1 25 pc(s). 1,200 pc(s).
EM pLED ST FX 202 LiFePO4 2W SCREW 89800800 139 x 30 x 21 mm 2 25 pc(s). 1,200 pc(s).
Clip fastening version
EM pLED ST FX 201 LiFePO4 1W CLIP 89800797 127 x 30 x 21 mm 1 25 pc(s). 1,200 pc(s).
EM pLED ST FX 202 LiFePO4 2W CLIP 89800799 127 x 30 x 21 mm 2 25 pc(s). 1,200 pc(s).
Certificates:
IP20
SELV
BSI
Short Circuit Proof
110
EL-T
doppelte Isolierung
EAC
CE
UKCA
ENEC
RoHs
Technical data
Rated supply voltage 220 – 240 V
交流电压范围 198 – 264 V
Mains frequency 50 / 60 Hz
THD (at 230 V, 50 Hz, full load) < 120 %
U-OUT (including open- / short-circuit and double load) 15 V
Max. open circuit voltage 15 V
Output current tolerance ± 10 %
Typical output LF current ripple at full load ± 5 %
Starting time < 0.7 s
输出电流 Refer to data sheet
Overvoltage protection 320 V (for 48 h)
Max. casing temperature tc 75 °C
环境温度 ta -25 ... +55 °C
Mains voltage changeover threshold According to EN 60598-2-22
Mains surge capability (between L - N) 1 kV
Surge voltage at output side (against PE) < 2 kV
Mains surge capability (between L/N - PE) 2 kV
保护类型 IP20
寿命 up to 100,000 h
Guarantee 5 Year(s)
滚动翻阅表格
Specific technical data
Type Rated duration Number of LEDs Typ. λ (at 230 V, 50 Hz) Forward voltage range LED module (1) (2) Non-maintained operation Maintained operation
Mains current in charging operation (3) Mains power in charging operation (3) Mains current in charging operation (3) Mains power in charging operation (3)
EM pLED ST FX 201 LiFePO4 1W SCREW 1 h 1 0.55C 2.6 – 3.4 V 16 / 11 mA 1.5 / 0.9 W 27 / 23 mA 3.5 / 2.8 W
EM pLED ST FX 201 LiFePO4 1W SCREW 2 h 1 0.55C 2.6 – 3.4 V 16 / 11 mA 1.5 / 0.9 W 27 / 23 mA 3.5 / 2.8 W
EM pLED ST FX 201 LiFePO4 1W SCREW 3 h 1 0.55C 2.6 – 3.4 V 21 / 11 mA 2.1 / 0.9 W 31 / 23 mA 4.0 / 2.8 W
EM pLED ST FX 202 LiFePO4 2W CLIP 1 h 1 0.58C 2.6 – 3.4 V 16 / 11 mA 1.5 / 0.9 W 27 / 23 mA 3.5 / 2.8 W
EM pLED ST FX 202 LiFePO4 2W CLIP 1 h 2 0.58C 5.2 – 6.8 V 16 / 11 mA 1.5 / 0.9 W 37 / 33 mA 5.0 / 4.1 W
EM pLED ST FX 202 LiFePO4 2W CLIP 2 h 1 0.58C 2.6 – 3.4 V 20 / 11 mA 2.2 / 0.9 W 31 / 23 mA 4.0 / 2.8 W
EM pLED ST FX 202 LiFePO4 2W CLIP 2 h 2 0.58C 5.2 – 6.8 V 20 / 11 mA 2.2 / 0.9 W 42 / 33 mA 5.5 / 4.1 W
EM pLED ST FX 202 LiFePO4 2W CLIP 3 h 1 0.58C 2.6 – 3.4 V 22 / 11 mA 2.5 / 0.9 W 33 / 23 mA 4.5 / 2.8 W
EM pLED ST FX 202 LiFePO4 2W CLIP 3 h 2 0.58C 5.2 – 6.8 V 22 / 11 mA 2.5 / 0.9 W 44 / 33 mA 5.8 / 4.1 W
EM pLED ST FX 202 LiFePO4 2W SCREW 1 h 1 0.58C 2.6 – 3.4 V 16 / 11 mA 1.5 / 0.9 W 27 / 23 mA 3.5 / 2.8 W
EM pLED ST FX 202 LiFePO4 2W SCREW 1 h 2 0.58C 5.2 – 6.8 V 16 / 11 mA 1.5 / 0.9 W 37 / 33 mA 5.0 / 4.1 W
EM pLED ST FX 202 LiFePO4 2W SCREW 2 h 1 0.58C 2.6 – 3.4 V 20 / 11 mA 2.2 / 0.9 W 31 / 23 mA 4.0 / 2.8 W
EM pLED ST FX 202 LiFePO4 2W SCREW 2 h 2 0.58C 5.2 – 6.8 V 20 / 11 mA 2.2 / 0.9 W 42 / 33 mA 5.5 / 4.1 W
EM pLED ST FX 202 LiFePO4 2W SCREW 3 h 1 0.58C 2.6 – 3.4 V 22 / 11 mA 2.5 / 0.9 W 33 / 23 mA 4.5 / 2.8 W
EM pLED ST FX 202 LiFePO4 2W SCREW 3 h 2 0.58C 5.2 – 6.8 V 22 / 11 mA 2.5 / 0.9 W 44 / 33 mA 5.8 / 4.1 W
EM pLED ST FX 201 LiFePO4 1W CLIP 1 h 1 0.55C 2.6 – 3.4 V 16 / 11 mA 1.5 / 0.9 W 27 / 23 mA 3.5 / 2.8 W
EM pLED ST FX 201 LiFePO4 1W CLIP 2 h 1 0.55C 2.6 – 3.4 V 16 / 11 mA 1.5 / 0.9 W 27 / 23 mA 3.5 / 2.8 W
EM pLED ST FX 201 LiFePO4 1W CLIP 3 h 1 0.55C 2.6 – 3.4 V 21 / 11 mA 2.1 / 0.9 W 31 / 23 mA 4.0 / 2.8 W
文件 大小 日期  
下载所有文件
 下载选中的文件
EM_powerLED_SELFTEST_FX_LiFePO4_1-2W_en.pdf
参数表
1.56 MB 28/09/2022
认证 / 符合性声明
型号      物品号      认证     
认证 ()

EM2检测开关 Accessories

Certificates:
RoHs

产品描述

  • For connection to the emergency lighting unit
  • For checking the device function
  • Dielectric strength: 1,500 V AC for 60 seconds
Ordering data
Type Article number Packaging, bag Packaging, carton Weight per pc.
Test switch EM 2 89805277 25 pc(s). 600 pc(s). 0.009 kg
CAD / RAY
Type Article number CAD文件
Test switch EM 2 89805277 CAD (1009.0 KB)

双色LED EM 状态指示 Accessories

Certificates:
RoHs

产品描述

  • 2种颜色的LED状态指示灯
  • Green: system OK, red: fault
Ordering data
Type 类型 Article number Packaging, bag Packaging, carton Weight per pc.
LED EM 双色 89899720 25 pc(s). 200 pc(s). 0.017 kg
LED EM 双色,高亮度 89899753 25 pc(s). 200 pc(s). 0.013 kg
CAD / RAY
Type Article number CAD文件
LED EM 89899720 CAD (579.9 KB)
LED EM 89899753 CAD (579.9 KB)

Accessories

产品描述

  • 用于磷酸铁锂电池的延长电缆
  • 导线长度500 mm
  • 3 极插头连接
Ordering data
Type Article number Packaging, bag Packaging, carton Weight per pc.
EXTENSION CABLE LiFePO4 500mm 28002461 10 pc(s). 200 pc(s). 0.01 kg
滚动翻阅表格
EPD
Type (1) Article number 环保产品声明(EPD)
EM pLED ST FX 201 LiFePO4 1W SCREW 89800798 EPD
EM pLED ST FX 202 LiFePO4 2W SCREW 89800800 EPD
EM pLED ST FX 201 LiFePO4 1W CLIP 89800797 EPD
EM pLED ST FX 202 LiFePO4 2W CLIP 89800799 EPD