- 锐高
- 产品
- LED驱动
- LED模组
- Tunable White
- 应急照明装置
- 概述
- 产品检索
- EM converterLED
- EM converterPACK
- EM powerLED
- Emergency lighting LED Driver 1 W
- Combined emergency lighting LED Driver 1 – 4 W
- EM powerLED BASIC FX LiFePO4 1 – 2 W
- EM powerLED BASIC 1 – 2 W
- EM powerLED SELFTEST FX LiFePO4 1 – 2 W
- EM powerLED SELFTEST 1 – 2 W
- EM powerLED PRO FX NF LiFePO4 1 – 2 W
- EM powerLED PRO FX LiFePO4 1 – 2 W
- EM powerLED PRO EZ-3, 1 – 2 W
- EM powerLED BASIC 4 W
- EM powerLED SELFTEST NM LiFePO4 4 W
- EM powerLED SELFTEST 4 W
- EM powerLED PRO NM NF LiFePO4 4 W
- EM powerLED PRO EZ-3, 4 W
- Combined emergency lighting LED Driver
- LED driver for AC and DC power supplies
- LED应急照明模块
- 应急照明控制装置
- 可充电电池
- 灯光控制与连接
- 应用领域
- 互联网照明
- 案例
- 服务
- 技术参数
- 联系
- 主页
- 产品
- ►
- 应急照明装置
- ►
- EM powerLED
- ►
- Combined emergency lighting LED Driver 1 – 4 W
- ►
- EM powerLED PRO NM NF LiFePO4 4 W
EM powerLED PRO NM NFC LiFePO4 4 W
Combined emergency lighting LED driver 1 – 4 W
产品描述
- 带有DALI界面和自动检测功能的应急照明LED驱动
- 适用于电池供电应急照明
- 输出电压 < 60 伏直流电的 SELV
- 超薄型尺寸（21 x 30 mm）
- EM = Emergency
- 5 年保修（保修条件请参见 www.tridonic.com）
特性
- 免维护运行
- 恒流模式
- 螺丝固定
- 1，2或3 h额定工作时间
- 可选择工作时间（跳线）
- 2种颜色的LED状态指示灯
- SELF分类（输出powerLED、蓄电池、LED 状态指示灯、测试开关）
- 激活深度放电保护后，电池能耗极低
接口
- 用于可测试和监控的DALI接口
- 近场通信 (NFC)
- 智能充电系统
- 深度放电保护
- 耐热保护符合
- 极性颠倒保护
电池
- 带锐高 LiFeGuard 的磷酸铁锂电池电池
- 过度充电/放电保护
- 确保使用安全
- 高达 8 年的设计寿命
- 4年质保
| Ordering data | |||||
|---|---|---|---|---|---|
| Type | Article number | Max. number of LEDs | Packaging, carton | Packaging, pallet | Weight per pc. |
| EM pLED PRO NM NF 201 LiFePO4 4W SCREW | 89800811 | 1 | 10 pc(s). | 800 pc(s). | 0.06 kg |
- Certificates:
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
| Technical data | |
|---|---|
| Rated supply voltage | 220 – 240 V |
| 交流电压范围 | 198 – 264 V |
| Mains frequency | 50 / 60 Hz |
| THD (at 230 V, 50 Hz, full load) | < 120 % |
| U-OUT (including open- / short-circuit and double load) | 15 V |
| Max. open circuit voltage | 15 V |
| Output current tolerance | ± 10 % |
| Typical output LF current ripple at full load | ± 5 % |
| Starting time | < 0.5 s |
| 输出电流 | Refer to data sheet |
| Overvoltage protection | 320 V (for 48 h) |
| Max. casing temperature tc | 75 °C |
| 环境温度 ta | -25 ... +55 °C |
| Mains voltage changeover threshold | According to EN 60598-2-22 |
| Mains surge capability (between L - N) | 1 kV |
| Surge voltage at output side (against PE) | < 2 kV |
| Mains surge capability (between L/N - PE) | 2 kV |
| 保护类型 | IP20 |
| 寿命 | up to 100,000 h |
| Guarantee (conditions at www.tridonic.com) | 5 Year(s) |
| Specific technical data | ||||||
|---|---|---|---|---|---|---|
| Type | Rated duration | Number of LEDs | Typ. λ (at 230 V, 50 Hz) | Forward voltage range LED module (1) (2) | Non-maintained operation | |
| Mains current in charging operation (3) | Mains power in charging operation (3) (4) | |||||
| EM pLED PRO NM NF 201 LiFePO4 4W SCREW | 1 h | 1 | 0.53C | 2.6 – 3.4 V | 21 / 11 mA | 2.4 / 1 W |
| EM pLED PRO NM NF 201 LiFePO4 4W SCREW | 1 h | 2 | 0.53C | 5.2 – 6.8 V | 21 / 11 mA | 2.4 / 1 W |
| EM pLED PRO NM NF 201 LiFePO4 4W SCREW | 2 h | 1 | 0.53C | 2.6 – 3.4 V | 23 / 11 mA | 2.7 / 1 W |
| EM pLED PRO NM NF 201 LiFePO4 4W SCREW | 2 h | 2 | 0.53C | 5.2 – 6.8 V | 23 / 11 mA | 2.7 / 1 W |
| EM pLED PRO NM NF 201 LiFePO4 4W SCREW | 3 h | 1 | 0.53C | 2.6 – 3.4 V | 27 / 11 mA | 3.3 / 1 W |
| EM pLED PRO NM NF 201 LiFePO4 4W SCREW | 3 h | 2 | 0.53C | 5.2 – 6.8 V | 27 / 11 mA | 3.3 / 1 W |
- (1) When exceeding the rated power of 4 W the LED current is reduced proportionally.
- (2) Tolerance range for electrical data: ±10 %.
- (3) For LiFePO4 batteries voltage dependent constant current charging is used. The values displayed are for charging on / charging off.
- (4) Integrated DALI bus power supply is switched OFF. With the Integrated DALI bus power supply switched ON and fully loaded the input power and current is increased by 1.4 W and 9 mA in any charging mode.
| 认证 / 符合性声明 | ||
| 型号 | 物品号 | 认证 |
|---|---|---|
| 认证 () | ||
EM2检测开关 Accessories
- Certificates:
-
产品描述
- For connection to the emergency lighting unit
- For checking the device function
- 介电强度：1,500 伏交流电，持续 60 秒
| Ordering data | ||||
|---|---|---|---|---|
| Type | Article number | Packaging, bag | Packaging, carton | Weight per pc. |
| Test switch EM 2 | 89805277 | 25 pc(s). | 600 pc(s). | 0.009 kg |
| CAD / RAY | ||
|---|---|---|
| Type | Article number | CAD文件 |
| Test switch EM 2 | 89805277 | CAD (1009.0 KB) |
双色LED EM 状态指示 Accessories
- Certificates:
-
产品描述
- 2种颜色的LED状态指示灯
- Green: system OK, red: fault
| Ordering data | |||||
|---|---|---|---|---|---|
| Type | 类型 | Article number | Packaging, bag | Packaging, carton | Weight per pc. |
| LED EM | 双色 | 89899720 | 25 pc(s). | 200 pc(s). | 0.017 kg |
| LED EM | 双色，高亮度 | 89899753 | 25 pc(s). | 200 pc(s). | 0.013 kg |
| CAD / RAY | ||
|---|---|---|
| Type | Article number | CAD文件 |
| LED EM | 89899720 | CAD (579.9 KB) |
| LED EM | 89899753 | CAD (579.9 KB) |
Accessories
产品描述
- 用于磷酸铁锂电池的延长电缆
- 导线长度500 mm
- 3 极插头连接
| Ordering data | ||||
|---|---|---|---|---|
| Type | Article number | Packaging, bag | Packaging, carton | Weight per pc. |
| EXTENSION CABLE LiFePO4 500mm | 28002461 | 10 pc(s). | 200 pc(s). | 0.01 kg |
EMpLED Strain-relief set 200x43x25,5mm Accessories
- Certificates:
-
-
产品描述
- 用于独立使用的选配应变消除装置
- 将 LED 驱动转换为与 Class II 完全兼容的 LED 驱动（例如，天花板安装）
- 无需工具即可轻松安装在 LED 驱动上，无螺丝电缆夹紧通道可消除长应力 (200 x 43 x 25,5 mm)
| Ordering data | |||
|---|---|---|---|
| Type | Article number | Packaging, carton | Weight per pc. |
| EM pLED SR | 28004033 | 10 pc(s). | 0.05 kg |
| EPD | ||
|---|---|---|
| Type | Article number | 环保产品声明(EPD) |
| EM pLED PRO NM NF 201 LiFePO4 4W SCREW | 89800811 | EPD |