概述
应急照明装置
包括 EM converterLED, EM powerLED high power, EM powerLED low power 和 EM ready2apply 的产品型谱覆盖了从简单到高度智能、从基础功能到高端的解决方案。
Wireless Emergency System – Emergency lighting made easy
Tridonic has an answer to the increasingly stringent maintenance and testing regulations that apply to emergency lighting. The new wireless emergency system based on Tridonic´s secure basicDIM Wireless solution can be integrated into existing installations in compliance with existing standards and without additional wiring. It also offers advantages in new buildings. In addition to lower complexity regarding planning and commissioning, it also reduces the time and materials required – and thus the total cost of the installation.
The benefits at a glance
- Intuitive planning and installation
- Modular solution for simple integration with luminaires
- One combined mesh for mains and emergency lighting
- Perfect solution for retrofit projects
- Central and cloud-based monitoring
- Automatic status documentation (one click reporting)
- No labour and cost intensive system testing
Every emergency lighting installation needs to be regularly tested and its status documented. This process is in many cases very labour and cost intensive. With the Tridonic wireless emergency system these steps are all done automatically and reports are available at the push of a button, at the same time making the planning and installation phase intuitive and easy.
By using the well-established backbone of the basicDIM Wireless system, the wireless emergency system uses a failsafe Bluetooth® Mesh network. With the addition of a basicDIM Wireless module, every DALI emergency luminaire can easily be converted to be used in the wireless emergency system. A gateway connects all the wireless emergency luminaires to a sceneCOM evo. A single controller can be used to connect up to 192 emergency luminaires.
For larger installations it is possible to link up to 200 sceneCOM evo units with the em-LINK v2 server application. It collects the information from all the sceneCOM evo units on a single page.
1 – basicDIM Wireless system
With the well-established backbone of the basicDIM Wireless system, the wireless emergency system uses a failsafe Bluetooth® mesh network.
more...
2 – EM PRO device
With the addition of a basicDIM Wireless module, every DALI emergency luminaire containing a Tridonic EM PRO device can easily be converted to be used in the wireless emergency system.
more…
3 – sceneCOM evo
This is the gateway which connects all the wireless emergency luminaires. A single controller can then connect up to 192 emergency luminaires.
more…
4 – em-LINK v2
Up to 200 sceneCOM evo units can be connected with the em-LINK v2 server application. The information from all the sceneCOM evo units is collected on a single page. Manual
5 – Emergency reports (daily / weekly)
At a glance, a dashboard provides information about the current status of the system and each luminaire as well as the latest test results.
确保更高安全性的蓄电池
锐高的所有应急灯蓄电池都经过严格测试。只有在运行多年后仍然能保证所需工作时间的高品质蓄电池才投入使用，从而保证将保养周期降低到最小。
所有三种蓄电池类型（1. NiCd，2. 环保的 NiMH 以及 3. 长寿命的 LiFePO4 蓄电池）都可选择用于广泛的应急灯 LED 驱动器产品。
LED 驱动器的充电控制器根据蓄电池类型进行区分，并且针对不同技术专门开发（LiFePO4 采用电压相关充电，NiCd 采用恒定电流充电以及 NiMH 采用间歇充电），从而在确保尽量小的能耗的同时又可保证最佳的蓄电池使用寿命。
始终如一的高质量
高品质的材料与经过认证 (ISO 9001) 的制造工艺相结合确保了锐高应急灯操控装置始终如一的高质量和可靠性。全自动制造流程确保了可再现的、始终如一的质量水平。此外所有操控装置百分百经过最终检测和安全测试。
标准和检验标志
锐高的应急照明操控装置已通过 ENEC 认证，带有 CE、RCM 和 C-Tick 标志，并符合所有欧洲和国际安全、工作原理和电磁兼容性 (EMC) 标准。除标准测试要求外，锐高公司的所有应急照明装置均带有 BSI KitemarkTM 标志，标明此为经检验的应急照明高质量产品。
使用 ST 装置的简化检验流程
带有自动测试和检测算法的 EM SELFTEST 应急灯操控装置以其最小规格的智能给人留下深刻的印象。
在自检模式中，该模块通过一个发光二极管显示其运行状态。绿色表示应急照明灯功能完好, 红色闪烁的 LED 表示电池损坏，而持续的红色指示灯则说明此灯发生了故障。
EM SELFTEST 应急灯操控装置作为测试功能可以进行持续监控、每周功能测试和每年工作时间测试。在充电模式中同时监控充电状况和静态运行状态。
EM SELFTEST 应急灯操控装置具有用于监控安装阶段的功能（也就是连续五天以上不间断供电的时间段）。一旦满足了该要求，模块将自动启动调试和定时器程序。这样，EM SELFTEST 就完成了自测标准 IEC 62034 中规定的安装后的调试测试。另外，这种“自动性”还显著减少了调试和测试算法编程所需的时间。
应急灯和 DALI 的组合
得益于 DALI 通信标准，锐高 PRO 系列应急灯组件可以顺利地集成到受监控的照明和应急灯系统中。锐高通过特殊的亮点突出了 DALI 系统的总体优势，这些亮点包括获得专利的 Easy Addressing 系统和可扩展控制系统（从紧凑型控制单元到 PC 软件)。