主页
产品
►
Tunable White
►
LED 线性型 / 区域型
►
TW LED Drivers
►
LCA 85 W 600–1800 mA DT8 lp PRE

Driver LCA 85W 600–1800mA DT8 lp PRE

LED 驱动器

产品描述

新增：lumDATA（DALI-2 第 251、252 和 253 部分）
用于灯具安装的可调光内置恒流 2 通道 LED 驱动，带 DALI-2 DT8
调光范围：3到100 %
适用于 I 类和 II 类防护等级的灯具（详见第 3.4 章数据表）
每个通道的输出电流在 600 - 1,800 毫安之间可调
最大输出功率85W
效率高达 90％
待机模式下的输入功率 < 0,5 W
高达100,000小时的额定寿命
5 年保修（保修条件请参见 www.tridonic.com）

外壳特性

带白色盖的薄型金属外壳
安全等级IP20

接口

one4all (DALI-2 DT8、DSI、switchDIM、corridorFUNCTION V2)
colourSWITCH
端口：0° 推入式端口

功能

1 毫安 (DALI) 增量可调输出电流或带电阻 (I-SELECT 2)
恒定光照输出功能
具有预定义颜色的 colourSWITCH
具有记忆功能的 switchDIM 和 colourSWITCH
启动渐暗和光强度渐变至零
通过 DALI 配置
保护功能（过热、短路、过载、空载、减小的浪涌放大）
智能电压保护（过压和欠压监控）
适用于符合 EN 50172 的应急照明系统

优点

通过 companionSUITE 灵活配置
具备最大兼容性并以应用为主导的操作窗口
较低的待机损失实现了最佳的节能
通过 DALI 和 I-SELECT 2 实现的灵活配置

典型应用

用于办公和医疗保健领域的线性/区域照明
可调白光应用

订货信息
常规数据
技术参数
下载
图像
链接
认证
配件
CAD/RAY
EPD

Ordering data
Type	Article number	Packaging, carton	Packaging, pallet	Weight per pc.
LCA 85W 600-1800mA DT8 lp PRE	28002830	10 pc(s).	480 pc(s).	0.277 kg

Luminaire types:

Certificates:

Technical data
Rated supply voltage	220 – 240 V
交流电压范围	198 – 264 V
DC voltage range	176 – 280 V
Mains frequency	0 / 50 / 60 Hz
Overvoltage protection	320 V AC, 48 h
Typ. current (at 230 V, 50 Hz, full load) (1) (2)	162 – 420 mA
Typ. current (220 V, 0 Hz, full load, 15 % dimming level) (2)	77 mA
Leakage current (at 230 V, 50 Hz, full load) (1) (2)	< 330 µA
Typ. efficiency (at 230 V, 50 Hz, full load) (2)	90 %
λ (at 230 V, 50 Hz, full load) (1)	0.98
Typ. power consumption on stand-by (3)	< 0.25 W
Typ. input current in no-load operation	25 mA
Typ. input power in no-load operation	< 0.5 W
In-rush current (peak / duration)	31.5 A / 215 µs
THD (at 230 V, 50 Hz, full load) (1)	< 10 %
Starting time (at 230 V, 50 Hz, full load) (1)	< 0.6 s
Starting time (DC mode)	< 0.4 s
Switchover time (AC/DC) (4)	< 0.2 s
Turn off time (at 230 V, 50 Hz, full load)	< 20 ms
Output current tolerance (1) (5)	± 3 %
Max. output current peak (non-repetitive)	≤ output current + 20 %
Output LF current ripple (< 120 Hz)	± 2.5 %
Output P_ST_LM (at full load)	≤ 1
Output SVM (at full load)	≤ 0.4
Max. output voltage (U-OUT)	60 V
调光范围	3 – 100 %
Colour tuning range	2,700 – 6,500 K
Mains surge capability (between L - N)	1 kV
Mains surge capability (between L/N - PE)	2 kV
Surge voltage at output side (against PE)	< 0.5 kV
保护类型	IP20
寿命	up to 100,000 h
Guarantee (conditions at www.tridonic.com)	5 Year(s)
尺寸长 x 宽 x 高	360 x 30 x 21 mm

⁽¹⁾ Valid at 100 % dimming level.
⁽²⁾ Depending on the selected output current.
⁽³⁾ Depending on the DALI traffic at the interface.
⁽⁴⁾ Valid for immediate change of power supply type otherwise the starting time is valid.
⁽⁵⁾ Output current is mean value.

Specific technical data
Type	Output current (1) (2)	Min. output voltage	Max. output voltage	Max. output power	Typ. power consumption (at 230 V, 50 Hz, full load)	Typ. current consumption (at 230 V, 50 Hz, full load)	tc point max.	环境温度 ta	I-SELECT 2 resistor value (3)
LCA 85W 600-1800mA DT8 lp PRE	600 mA	20 V	50.0 V	30.0 W	35.0 W	162 mA	79 °C	-25 ... +60 °C	–
LCA 85W 600-1800mA DT8 lp PRE	650 mA	20 V	50.0 V	32.5 W	37.6 W	173 mA	79 °C	-25 ... +60 °C	7.69 kΩ
LCA 85W 600-1800mA DT8 lp PRE	700 mA	20 V	50.0 V	35.0 W	40.2 W	183 mA	79 °C	-25 ... +60 °C	7.14 kΩ
LCA 85W 600-1800mA DT8 lp PRE	750 mA	20 V	50.0 V	37.5 W	39.8 W	183 mA	79 °C	-25 ... +60 °C	6.67 kΩ
LCA 85W 600-1800mA DT8 lp PRE	800 mA	20 V	50.0 V	40.0 W	45.5 W	208 mA	79 °C	-25 ... +60 °C	6.25 kΩ
LCA 85W 600-1800mA DT8 lp PRE	850 mA	20 V	50.0 V	42.5 W	48.1 W	219 mA	79 °C	-25 ... +60 °C	5.88 kΩ
LCA 85W 600-1800mA DT8 lp PRE	900 mA	20 V	50.0 V	45.0 W	50.7 W	231 mA	79 °C	-25 ... +60 °C	5.56 kΩ
LCA 85W 600-1800mA DT8 lp PRE	950 mA	20 V	50.0 V	47.5 W	53.5 W	243 mA	79 °C	-25 ... +60 °C	5.26 kΩ
LCA 85W 600-1800mA DT8 lp PRE	1,000 mA	20 V	50.0 V	50.0 W	56.0 W	254 mA	79 °C	-25 ... +60 °C	5.00 kΩ
LCA 85W 600-1800mA DT8 lp PRE	1,050 mA	20 V	50.0 V	52.5 W	58.7 W	265 mA	79 °C	-25 ... +60 °C	4.76 kΩ
LCA 85W 600-1800mA DT8 lp PRE	1,100 mA	20 V	50.0 V	55.0 W	61.3 W	277 mA	79 °C	-25 ... +60 °C	4.55 kΩ
LCA 85W 600-1800mA DT8 lp PRE	1,150 mA	20 V	50.0 V	57.5 W	64.0 W	289 mA	79 °C	-25 ... +60 °C	4.35 kΩ
LCA 85W 600-1800mA DT8 lp PRE	1,200 mA	20 V	50.0 V	60.0 W	66.7 W	300 mA	83 °C	-25 ... +55 °C	4.17 kΩ
LCA 85W 600-1800mA DT8 lp PRE	1,250 mA	20 V	50.0 V	62.5 W	69.4 W	312 mA	83 °C	-25 ... +55 °C	4.00 kΩ
LCA 85W 600-1800mA DT8 lp PRE	1,300 mA	20 V	50.0 V	65.0 W	68.8 W	308 mA	83 °C	-25 ... +55 °C	3.85 kΩ
LCA 85W 600-1800mA DT8 lp PRE	1,350 mA	20 V	50.0 V	67.5 W	74.8 W	334 mA	83 °C	-25 ... +55 °C	3.70 kΩ
LCA 85W 600-1800mA DT8 lp PRE	1,400 mA	20 V	50.0 V	70.0 W	77.5 W	347 mA	83 °C	-25 ... +55 °C	3.57 kΩ
LCA 85W 600-1800mA DT8 lp PRE	1,450 mA	20 V	50.0 V	72.5 W	80.2 W	358 mA	83 °C	-25 ... +55 °C	3.45 kΩ
LCA 85W 600-1800mA DT8 lp PRE	1,500 mA	20 V	50.0 V	75.0 W	83.0 W	371 mA	83 °C	-25 ... +50 °C	3.33 kΩ
LCA 85W 600-1800mA DT8 lp PRE	1,550 mA	20 V	50.0 V	77.5 W	85.6 W	383 mA	83 °C	-25 ... +50 °C	3.23 kΩ
LCA 85W 600-1800mA DT8 lp PRE	1,600 mA	20 V	50.0 V	80.0 W	88.5 W	394 mA	83 °C	-25 ... +50 °C	3.13 kΩ
LCA 85W 600-1800mA DT8 lp PRE	1,650 mA	20 V	50.0 V	82.5 W	91.3 W	406 mA	83 °C	-25 ... +50 °C	3.03 kΩ
LCA 85W 600-1800mA DT8 lp PRE	1,700 mA	20 V	50.0 V	85.0 W	94.0 W	419 mA	83 °C	-25 ... +50 °C	2.94 kΩ
LCA 85W 600-1800mA DT8 lp PRE	1,750 mA	20 V	48.6 V	85.0 W	94.1 W	421 mA	83 °C	-25 ... +50 °C	2.86 kΩ
LCA 85W 600-1800mA DT8 lp PRE	1,800 mA	20 V	47.2 V	85.0 W	94.3 W	420 mA	83 °C	-25 ... +50 °C	0.00 kΩ

⁽¹⁾ The table only lists a number of possible operating points but does not cover each single point. The output current can be set within the total value range in 1-mA-steps.
⁽²⁾ Output current is mean value.
⁽³⁾ Not compatible with I-SELECT (generation 1). Calculated resistor value.

	文件	大小	日期
下载选中的文件
	参数表	2.65 MB	10/11/2022
	LED drivers – Functional description	4.59 MB	10/07/2023
	Leaflet Tunable White	1.63 MB	23/03/2022
	Leaflet – LED Drivers	2.7 MB	26/04/2022

认证 / 符合性声明

		认证 ()

I-SELECT 2 PLUG PRE / EXC Accessories

产品描述

用于设定输出电流值的即用型电阻
与LED驱动I-select 2界面兼容；与1代I-SELECT不兼容
电阻为基本绝缘
电阻功率 0.25 瓦
电流容差额定输出为电流容差的±2％
与LED驱动PRE和EXC系列兼容

计算示例

R [kΩ] = 5 V / I_out [mA] x 1000
使用 E96 电阻
电阻值公差 ≤ 1％；电阻功率 ≥ 0.1 瓦；需要基本绝缘
当使用超过指定范围的电阻值时，输出电流将自动设置为最小值（电阻值过大时）或最大值（电阻值过小时）

Ordering data
Type	Article number	颜色	Marking	电流	Resistor value	Packaging, bag	Weight per pc.
I-SELECT 2 PLUG 600MA BL	28001116	Blue	0600 mA	600 mA	8.25 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 650MA BL	28001117	Blue	0650 mA	650 mA	7.68 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 700MA BL	28001118	Blue	0700 mA	700 mA	7.15 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 750MA BL	28001119	Blue	0750 mA	750 mA	6.65 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 800MA BL	28001120	Blue	0800 mA	800 mA	6.19 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 850MA BL	28001121	Blue	0850 mA	850 mA	5.90 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 900MA BL	28001122	Blue	0900 mA	900 mA	5.62 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 950MA BL	28001123	Blue	0950 mA	950 mA	5.23 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 1000MA BL	28001124	Blue	1000 mA	1,000 mA	4.99 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 1050MA BL	28001125	Blue	1050 mA	1.050 mA	4.75 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 1100MA BL	28001126	Blue	1100 mA	1,100 mA	4.53 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 1150MA BL	28001127	Blue	1150 mA	1,150 mA	4.32 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 1200MA BL	28001128	Blue	1200 mA	1.200 mA	4.12 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 1250MA BL	28001129	Blue	1250 mA	1,250 mA	4.02 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 1300MA BL	28001130	Blue	1300 mA	1,300 mA	3.83 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 1350MA BL	28001131	Blue	1350 mA	1,350 mA	3.74 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 1400MA BL	28001132	Blue	1400 mA	1,400 mA	3.57 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 1500MA BL	28001133	Blue	1500 mA	1,500 mA	3.32 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 1600MA BL	28001134	Blue	1600 mA	1,600 mA	3.16 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 1700MA BL	28001135	Blue	1700 mA	1,700 mA	2.94 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 1800MA BL	28001136	Blue	1800 mA	1,800 mA	2.80 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG MAX BL	28001099	Blue	MAX	MAX	0.00 kΩ	10 pc(s).	0.001 kg

CAD / RAY
Type	Article number	CAD文件
I-SELECT 2 PLUG 600MA BL	28001116	CAD (712.6 KB)
I-SELECT 2 PLUG 650MA BL	28001117	CAD (712.6 KB)
I-SELECT 2 PLUG 700MA BL	28001118	CAD (712.6 KB)
I-SELECT 2 PLUG 750MA BL	28001119	CAD (712.6 KB)
I-SELECT 2 PLUG 800MA BL	28001120	CAD (712.6 KB)
I-SELECT 2 PLUG 850MA BL	28001121	CAD (712.6 KB)
I-SELECT 2 PLUG 900MA BL	28001122	CAD (712.6 KB)
I-SELECT 2 PLUG 950MA BL	28001123	CAD (712.6 KB)
I-SELECT 2 PLUG 1000MA BL	28001124	CAD (712.6 KB)
I-SELECT 2 PLUG 1050MA BL	28001125	CAD (712.6 KB)
I-SELECT 2 PLUG 1100MA BL	28001126	CAD (712.6 KB)
I-SELECT 2 PLUG 1150MA BL	28001127	CAD (712.6 KB)
I-SELECT 2 PLUG 1200MA BL	28001128	CAD (712.6 KB)
I-SELECT 2 PLUG 1250MA BL	28001129	CAD (712.6 KB)
I-SELECT 2 PLUG 1300MA BL	28001130	CAD (712.6 KB)
I-SELECT 2 PLUG 1350MA BL	28001131	CAD (712.6 KB)
I-SELECT 2 PLUG 1400MA BL	28001132	CAD (712.6 KB)
I-SELECT 2 PLUG 1500MA BL	28001133	CAD (712.6 KB)
I-SELECT 2 PLUG 1600MA BL	28001134	CAD (712.6 KB)
I-SELECT 2 PLUG 1700MA BL	28001135	CAD (712.6 KB)
I-SELECT 2 PLUG 1800MA BL	28001136	CAD (712.6 KB)
I-SELECT 2 PLUG MAX BL	28001099	CAD (712.6 KB)

CAD / RAY
Type	Article number	CAD文件
LCA 85W 600-1800mA DT8 lp PRE	28002830	CAD (560.9 KB)

文件	国家	大小	颁发日期

				新

Driver LCA 85W 600–1800mA DT8 lp PRE

产品描述

外壳特性

接口

功能

优点

典型应用

更多信息

证书: ()

I-SELECT 2 PLUG PRE / EXC Accessories

产品描述

计算示例