Driver LC 10W 150–400mA flexC C EXC

excite标准版系列

产品描述

  • 恒流LED驱动
  • 在150和400毫安之间的可调节输出电流通过 ready2mains Programmer 或 I-SELECT 2 plugs输出
  • 最大输出功率10 W
  • 效率高达 81％
  • 高达100,000小时的额定寿命
  • 5 年保修（保修条件请参见 www.tridonic.com）

外壳特性

  • 外壳: PC塑料, 白色
  • 安全等级IP20

接口

  • ready2mains（通过电源配置）
  • 端口：45° 推入式端口

功能

  • 1毫安的可调节输出电流 (ready2mains, I-SELECT 2)
  • 保护功能（过热、短路、过载、空载、输入电压范围）
  • 智能电压保护（过压和欠压监控）
  • 适用于符合 EN 50172 的应急照明系统

优点

  • 具备最大兼容性并以应用为主导的操作窗口
  • 高效率实现最佳节能效果
  • 通过ready2mains和 I-SELECT 2进行灵活配置

典型应用

  • 用于筒灯，聚光灯，装饰运用
滚动翻阅表格
Ordering data
Type Article number Packaging, carton Packaging, pallet Weight per pc.
LC 10W 150-400mA flexC C EXC 28000692 10 pc(s). 1,120 pc(s). 0.119 kg
Luminaire types:
Certificates:
IP20
SELV
Short Circuit Proof
110
r2m
EAC
KC
CCC
RCM
CE
UKCA
ENEC
RoHs
Technical data
Rated supply voltage 220 – 240 V
交流电压范围 198 – 264 V
DC voltage range 176 – 280 V
Mains frequency 0 / 50 / 60 Hz
Overvoltage protection 320 V AC, 48 h
Typ. rated current (at 230 V, 50 Hz, full load) (1) 56.8 mA
Typ. current (220 V, 0 Hz, full load, 100 % dimming level) (1) 54.3 mA
Leakage current (at 230 V, 50 Hz, full load) (1) < 250 µA
Max. input power 12 W
Typ. efficiency (at 230 V, 50 Hz, full load) (1) 81 %
λ (at 230 V, 50 Hz, full load) 0.92C
Typ. input current in no-load operation 12 mA
Typ. input power in no-load operation 0.6 W
In-rush current (peak / duration) 17 A / 309 µs
THD (at 230 V, 50 Hz, full load) < 10 %
Starting time (at 230 V, 50 Hz, full load) < 500 ms
Starting time (DC mode) < 500 ms
Switchover time (AC/DC) (2) < 0.2 s
Turn off time (at 230 V, 50 Hz, full load) < 50 ms
Output current tolerance (3) (4) ± 5 %
Max. output current peak (non-repetitive) ≤ output current + 30 %
Output LF current ripple (< 120 Hz) ± 5 %
Output P_ST_LM (at full load) ≤ 1
Output SVM (at full load) ≤ 0.4
Max. output voltage (U-OUT) 60 V
Mains surge capability (between L - N) 1 kV
Mains surge capability (between L/N - PE) 2 kV
Burst / surge peaks output side against PE < 500 V
保护类型 IP20
寿命 up to 100,000 h
Guarantee (conditions at www.tridonic.com) 5 Year(s)
尺寸 长 x 宽 x 高 105 x 70 x 22 mm
滚动翻阅表格
Specific technical data
Type Output current (1) (2) Min. output voltage Max. output voltage Max. output power Typ. power consumption (at 230 V, 50 Hz, full load) Typ. current consumption (at 230 V, 50 Hz, full load) tc point max. 环境温度 ta I-SELECT 2 resistor value (3)
LC 10W 150-400mA flexC C EXC 150 mA 15 V 40.0 V 6 W 7.3 W 40 mA 75 °C -25 ... +60 °C –
LC 10W 150-400mA flexC C EXC 175 mA 15 V 40.0 V 7 W 8.4 W 44 mA 75 °C -25 ... +60 °C 28.75 kΩ
LC 10W 150-400mA flexC C EXC 200 mA 15 V 40.0 V 8 W 9.6 W 48 mA 75 °C -25 ... +60 °C 25.00 kΩ
LC 10W 150-400mA flexC C EXC 225 mA 15 V 40.0 V 9 W 10.6 W 53 mA 75 °C -25 ... +60 °C 22.22 kΩ
LC 10W 150-400mA flexC C EXC 250 mA 15 V 40.0 V 10 W 11.7 W 57 mA 75 °C -25 ... +60 °C 20.00 kΩ
LC 10W 150-400mA flexC C EXC 275 mA 15 V 36.3 V 10 W 11.8 W 57 mA 75 °C -25 ... +60 °C 18.18 kΩ
LC 10W 150-400mA flexC C EXC 300 mA 15 V 33.3 V 10 W 11.7 W 57 mA 75 °C -25 ... +60 °C 16.67 kΩ
LC 10W 150-400mA flexC C EXC 325 mA 15 V 30.7 V 10 W 11.9 W 57 mA 75 °C -25 ... +60 °C 15.38 kΩ
LC 10W 150-400mA flexC C EXC 350 mA 15 V 28.6 V 10 W 11.8 W 57 mA 75 °C -25 ... +60 °C 14.29 kΩ
LC 10W 150-400mA flexC C EXC 375 mA 15 V 26.7 V 10 W 11.9 W 57 mA 75 °C -25 ... +60 °C 13.33 kΩ
LC 10W 150-400mA flexC C EXC 400 mA 15 V 25.0 V 10 W 12.0 W 57 mA 75 °C -25 ... +60 °C 0.00 kΩ
文件      大小      日期       
 
TALEXXdriver_LC_10W_150-400mA_flexC_C_EXC_en.pdf
参数表 		1.27 MB 01/10/2021
Leaflet_Driver_EN_web.pdf
Leaflet – LED Drivers 		2.7 MB 26/04/2022
认证 / 符合性声明
型号      物品号      认证     
认证 ()

证书: ()

文件      国家      大小      颁发日期     
新

I-SELECT 2 PLUG PRE / EXC Accessories

产品描述

  • 用于设定输出电流值的即用型电阻
  • 与LED驱动I-select 2界面兼容；与1代I-SELECT不兼容
  • 电阻为基本绝缘
  • 电阻功率 0.25 瓦
  • 电流容差额定输出为电流容差的±2％
  • 与LED驱动PRE和EXC系列兼容

计算示例

  • R [kΩ] = 5 V / I_out [mA] x 1000
  • 使用 E96 电阻
  • 电阻值公差 ≤ 1％；电阻功率 ≥ 0.1 瓦；需要基本绝缘
  • 当使用超过指定范围的电阻值时，输出电流将自动设置为最小值（电阻值过大时）或最大值（电阻值过小时）
Ordering data
Type Article number 颜色 Marking 电流 Resistor value Packaging, bag Weight per pc.
I-SELECT 2 PLUG 150MA BL 28001102 Blue 0150 mA 150 mA 33.20 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 200MA BL 28001104 Blue 0200 mA 200 mA 24.90 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 250MA BL 28001106 Blue 0250 mA 250 mA 20.00 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 300MA BL 28001108 Blue 0300 mA 300 mA 16.50 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 350MA BL 28001110 Blue 0350 mA 350 mA 14.30 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 400MA BL 28001112 Blue 0400 mA 400 mA 12.40 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG MAX BL 28001099 Blue MAX MAX 0.00 kΩ 10 pc(s). 0.001 kg
CAD / RAY
Type Article number CAD文件
I-SELECT 2 PLUG 150MA BL 28001102 CAD (712.6 KB)
I-SELECT 2 PLUG 200MA BL 28001104 CAD (712.6 KB)
I-SELECT 2 PLUG 250MA BL 28001106 CAD (712.6 KB)
I-SELECT 2 PLUG 300MA BL 28001108 CAD (712.6 KB)
I-SELECT 2 PLUG 350MA BL 28001110 CAD (712.6 KB)
I-SELECT 2 PLUG 400MA BL 28001112 CAD (712.6 KB)
I-SELECT 2 PLUG MAX BL 28001099 CAD (712.6 KB)
滚动翻阅表格
CAD / RAY
Type Article number CAD文件
LC 10W 150-400mA flexC C EXC 28000692 CAD (756.5 KB)
EPD
Type Article number 环保产品声明(EPD)
LC 10W 150-400mA flexC C EXC 28000692 EPD