Driver LCA 75W 100–400mA 1-10V lp EXC

EXCITE non-SELV

产品描述

  • 用于灯具安装的恒流LED驱动
  • 可通过 1 ... 10 伏接口调光
  • 调光范围 10 - 100%(取决于负载。详细信息请参见第 4.7 节调光范围数据表。)
  • 在100和400毫安之间的可调节输出电流通过 ready2mains Programmer 或 I-select 2 plugs输出
  • 最大输出功率75W
  • 效率高达 94%
  • 适用于保护等级1及保护等级2两类灯具
  • 高达100,000小时的额定寿命
  • 五年保修期

外壳特性

  • 带白色盖的薄型金属外壳
  • 安全等级IP20

接口

  • ready2mains 配置
  • 通过 1 ... 10 伏接口调光
  • 端口:0° 推入式端口

功能

  • 1毫安的可调节输出电流 (ready2mains, I-select 2)
  • 可通过 1 ... 10 伏接口调光
  • 保护功能(过热、短路、过载、空载、输入电压范围)
  • 适用于符合 EN 50172 的应急照明系统

优点

  • 具备最大兼容性并以应用为主导的操作窗口
  • 通过 1 ... 10 伏接口的高效率和调光实现最佳的节能
  • 通过ready2mains和 I-select 2进行灵活配置
  • 高达 100,000 小时的使用寿命和 5 年保证

典型应用

  • 为了在办公应用里线性或大面积照明
滚动翻阅表格
Ordering data
Type Article number Packaging, carton Packaging, pallet Weight per pc.
LC 75W 100-400mA 1-10V lp EXC 28001807 10 pc(s). 960 pc(s). 0,189 kg
Lamp types:
Certificates:
IP20
120
r2m
EL
EAC
RCM
CE
ENEC
RoHs
Technical data
Rated supply voltage 220 – 240 V
交流电压范围 198 – 264 V
DC voltage range 176 – 280 V
Mains frequency 0 / 50 / 60 Hz
Overvoltage protection 320 V AC, 48 h
Typ. rated current (at 230 V, 50 Hz, full load) (1) (2) 350 mA
Typ. current (220 V, 0 Hz, full load, 50 % dimming level) (2) 173 mA
Leakage current (at 230 V, 50 Hz, full load) (1) (2) < 250 µA
Max. input power 80,9 W
Typ. efficiency (at 230 V, 50 Hz, full load) (2) 94 %
λ (at 230 V, 50 Hz, full load) (1) 0,99
Typ. input current in no-load operation 24 mA
Typ. input power in no-load operation 0,6 W
In-rush current (peak / duration) 25,8 A / 280 µs
THD (at 230 V, 50 Hz, full load) (1) < 10 %
Time to light (at 230 V, 50 Hz, full load) (1) < 500 ms
Time to light (DC mode) < 500 ms
Switchover time (AC/DC) < 0,2 s
Turn off time (at 230 V, 50 Hz, full load) < 50 ms
Output current tolerance (1) (3) ± 5 %
Max. output current peak (non-repetitive) ≤ output current + 35 %
Output LF current ripple (< 120 Hz) ± 5 %
Max. output voltage 250 V
调光范围 (4) 10 – 100 %
Mains surge capability (between L - N) 1 kV
Mains surge capability (between L/N - PE) 2 kV
Burst / surge peaks output side against PE 2 kV
Dimensions L x W x H 280 x 30 x 21 mm
滚动翻阅表格
Specific technical data
Type Output current (1) (2) Min. forward voltage Max. forward voltage Max. output power Typ. power consumption (at 230 V, 50 Hz, full load) Typ. current consumption (at 230 V, 50 Hz, full load) tc point max. 环境温度 ta I-select 2 resistor value (3)
LC 75W 100-400mA 1-10V lp EXC 100 mA 50 V 220 V 22,0 W 24,3 W 114 mA 75 °C -25 ... +65 °C
LC 75W 100-400mA 1-10V lp EXC 125 mA 50 V 220 V 27,5 W 30,3 W 139 mA 75 °C -25 ... +65 °C 40,00 kΩ
LC 75W 100-400mA 1-10V lp EXC 150 mA 50 V 220 V 33,0 W 34,3 W 156 mA 75 °C -25 ... +65 °C 33,33 kΩ
LC 75W 100-400mA 1-10V lp EXC 175 mA 50 V 220 V 38,5 W 41,9 W 188 mA 75 °C -25 ... +65 °C 28,57 kΩ
LC 75W 100-400mA 1-10V lp EXC 200 mA 50 V 220 V 44,0 W 48,4 W 215 mA 75 °C -25 ... +65 °C 25,00 kΩ
LC 75W 100-400mA 1-10V lp EXC 225 mA 50 V 220 V 49,5 W 53,8 W 238 mA 80 °C -25 ... +60 °C 22,22 kΩ
LC 75W 100-400mA 1-10V lp EXC 250 mA 50 V 220 V 55,0 W 58,8 W 260 mA 80 °C -25 ... +60 °C 20,00 kΩ
LC 75W 100-400mA 1-10V lp EXC 275 mA 50 V 220 V 60,5 W 64,8 W 285 mA 80 °C -25 ... +60 °C 18,18 kΩ
LC 75W 100-400mA 1-10V lp EXC 300 mA 50 V 220 V 66,0 W 70,7 W 311 mA 80 °C -25 ... +60 °C 16,67 kΩ
LC 75W 100-400mA 1-10V lp EXC 325 mA 50 V 220 V 71,5 W 76,5 W 336 mA 75 °C -25 ... +55 °C 15,38 kΩ
LC 75W 100-400mA 1-10V lp EXC 350 mA 50 V 214 V 75,0 W 80,6 W 353 mA 75 °C -25 ... +55 °C 14,29 kΩ
LC 75W 100-400mA 1-10V lp EXC 375 mA 50 V 200 V 75,0 W 80,9 W 355 mA 75 °C -25 ... +55 °C 13,33 kΩ
LC 75W 100-400mA 1-10V lp EXC 400 mA 50 V 188 V 75,0 W 80,6 W 354 mA 75 °C -25 ... +55 °C 0,00 kΩ
文件      大小      日期       
下载所有文件 下载选中的文件
Driver_LCA_75W_100-400mA_1-10V_lp_EXC_en.pdf
参数表
1.05 MB 02/10/2017
Leaflet_Driver_EXC_EN_web.pdf
Leaflet – Driver EXCITE
855 KB 02/10/2017
Leaflet_ready2mains_EN_web.pdf
Leaflet – ready2mains
1.23 MB 02/10/2017
认证 / 符合性声明
型号      物品号      认证     
认证 ()

I-SELECT 2 PLUG PRE / EXC Accessories

产品描述

  • 用于设定输出电流值的即用型电阻
  • 与LED驱动I-select 2界面兼容;与1代I-select不兼容
  • 电阻为基本绝缘
  • 电阻功率 0.25 瓦
  • 电流容差额定输出为电流容差的±2%
  • 与LED驱动PRE和EXC系列兼容

计算示例

  • R [kΩ] = 5 V / I_out [mA] x 1000
  • 电阻值公差 ≤ 1%;电阻功率 ≥ 0.1 瓦;需要基本绝缘
  • 当使用超过指定范围的电阻值时,输出电流将自动设置为最小值(电阻值过大时)或最大值(电阻值过小时)
Ordering data
Type Article number 颜色 Marking 电流 Resistor value Packaging, bag Weight per pc.
I-SELECT 2 PLUG 125MA BL 28001101 Blue 0125 mA 125 mA 40,00 kΩ 10 pc(s). 0,001 kg
I-SELECT 2 PLUG 150MA BL 28001102 Blue 0150 mA 150 mA 33,33 kΩ 10 pc(s). 0,001 kg
I-SELECT 2 PLUG 175MA BL 28001103 Blue 0175 mA 175 mA 28,57 kΩ 10 pc(s). 0,001 kg
I-SELECT 2 PLUG 200MA BL 28001104 Blue 0200 mA 200 mA 25,00 kΩ 10 pc(s). 0,001 kg
I-SELECT 2 PLUG 225MA BL 28001105 Blue 0225 mA 225 mA 22,22 kΩ 10 pc(s). 0,001 kg
I-SELECT 2 PLUG 250MA BL 28001106 Blue 0250 mA 250 mA 20,00 kΩ 10 pc(s). 0,001 kg
I-SELECT 2 PLUG 275MA BL 28001107 Blue 0275 mA 275 mA 18,18 kΩ 10 pc(s). 0,001 kg
I-SELECT 2 PLUG 300MA BL 28001108 Blue 0300 mA 300 mA 16,67 kΩ 10 pc(s). 0,001 kg
I-SELECT 2 PLUG 325MA BL 28001109 Blue 0325 mA 325 mA 15,38 kΩ 10 pc(s). 0,001 kg
I-SELECT 2 PLUG 350MA BL 28001110 Blue 0350 mA 350 mA 14,29 kΩ 10 pc(s). 0,001 kg
I-SELECT 2 PLUG 375MA BL 28001111 Blue 0375 mA 375 mA 13,33 kΩ 10 pc(s). 0,001 kg
I-SELECT 2 PLUG 400MA BL 28001112 Blue 0400 mA 400 mA 12,50 kΩ 10 pc(s). 0,001 kg
I-SELECT 2 PLUG MAX BL 28001099 Blue MAX MAX 0,00 kΩ 10 pc(s). 0,001 kg
滚动翻阅表格
CAD / RAY
Type Article number CAD文件
LC 75W 100-400mA 1-10V lp EXC 28001807 CAD (506.0 KB)